EMT Practice Test

1. Question Content...

---

Question1: A technician is planning to upgrade a customer's existing Communication Server 1000E Rls. 6.0 system.
During the upgrade, a CPPM server card from storage will be added to provide an additional signaling server.
Which two statements describes what must be done to the CPPM server card to distinguished it as a signaling Server (Choose two)

Question2: A technician is planning an upgrade for a customer's Communication Server (CS) 1000E Release 6.0 system to Release 7x.
Which two features are now to the Release 7x Deployment manager? (Choose two)

Question3: A Communication Server (CS) 1000E Rls. 7x customer has decided to implement UNIStim security with DTLS.
Which statement regarding UNIStim security with DTLS is true?

Question4: A customer purchased a new Communication Server 1000E SA system with five media gateways which includes:
MG 1: CPMG (Call Server, Signaling Server, Media Gateways Controller)
MG 2: Media Gateway Controller
MG 3: Media Gateway Controller
MG 4: Media Gateway Controller
MG 5: Media Gateway Controller
Which statement is true regarding the configuration of Media Gateway?

Question5: A customer with a Communications Server (CS) Rls. 6.0 HA system with two IPMGs and dual CPPM signaling Servers is upgrading their system to release 7x with Avaya Aura integration with Session Manager. The system is part of an IP peer network that includes a NRS database that needs to be converted and imported into the System Managre.
Which upgrade setup is correct?

Question6: A technician is upgrading an existing Option 11C 5.5 system to a Communication Server (CS) 1000E Rls.
7x Standard Availability with a single media Gateway 1000E chassis. A CPMG Co-Resident Server card is being deployed during the upgrade. This is a stand-alone system that is not part of a larger network so the CPMG will act as its own Primary Server.
Which application should be deployed on the CPMG server for this customer?

Question7: A technician has installed the Linux base into a commercial of the shelf (COTS) server that will be configured as a Member Server. The Security Configuration is ready to be performed. All LAN connections are in place and functioning normally.
After connecting through a browser, what is the next step to perform the Security Configuration of this COTS Member server?

Question8: A technician deployed a Communication Server 1000E with dual homing feature configured. Both the T and 2T ports are connected on the media Gateway Controller (MGC) one connection is active to avoid network loops.
Which two statements are true, if the connection to the active port on the MGC is host?
(Choose two)

Question9: A technician is installing a new Communication Server (CS) 1000E Rls. 7x system for a customer. The requirements include installation of IP telephones for a small group of inside sales people. The telephones have been configured and are ready to be registered.
Which two items are to be entered when performing the IP telephone registration? (Choose two)

Question10: A technician has just installed and configured a System Manager as the primary security Server and configured a Member Security Server with the Element Manager and Subscriber Manager Applications deployed. The Communication Server (CS) 1000E Rls. 7x Call Server is part of this server security domain. All connections are up and running. When the new CS 1000 Rls. 7x system link on the elements window is clicked, the web browser returns with the following message.
"Destination IP address cannot be reached"
What is causing the problem?

Question11: A technician is upgrading an option 11C Rls. 5x to a communication server 1000E SA Rls. 7x based on a CPPM CS, COTS SS with 4 chassis media gateway (MG), 100IP sets, 124 digital sets, 30 analog sets and one PR12 DID connection for the incoming and outgoing calls cannot be made from all type of the sets except for the sets in MG3.
When the technician is finished with the upgrade it is noticed during the acceptance testing that outgoing calls cannot be made from all type of the sets except for the sets in mG3. All the sets have dial tone.
Which statement describes what is causing this issue?

Question12: You are installing a new Communication Server 1000E (CS 1000E) SA release 7x system for your customer. They have asked you to implement the corporate Directory Feature during the installation.

Question13: A customer has deployed a Communication Server 100 Rls. 7x system at their site. The technician has been asked to add the Call pickup feature to the 100 IP telephone in the sales department. The customer wants to be sure active calls not lost when the changes are made.
Which Phones Configuration feature can be enabled that will ensure changes to the telephone are not transmitted to the call server until the telephone are busy?

Question14: Click the Exhibit button.

A customer has added a new Communication Server 1000E (CS 1000E) Standard Availability to their existing network of CS 1000M Single Group system. They are planning to use some of the spare digital telephone on the new system as well as new IP telephone.
With reference to system showing three vacant slots, which two components are required to configure the system so that the digital telephone are supported and can communicate with the IP telephone? (Choose two)

Question15: A customer requires an upgrade from release Communication Server 1000E Rls. 7x. the current system has a release 5.0 CPPM Call Server and an ISP 1100 Signaling Server. They have 874 IP telephone users and 810 TDM telephone deployed.
Which upgrade will support the customer's current deployment scenario?

Question16: A customer has successfully installed a Common Processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. The MGC has registered with the Call Server.
What is displayed on the CPMG LED display to confirm successful registration?

Question17: A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server, Signaling Server Card and Gateway Controller has been included as part of the upgrade.
What happens to the Terminal Number (TN) format during this upgrade?

Question18: A customer has Communication Server (CS) RLS. 7x system, and the technician wants to create an account capable of configuring a network Time Protocol (NTP) server.
What must be done to access the data and time parameters?

Question19: A customer has completed installing and configuring a new CPMG Co-Resident Platform. The Gateway controller has rebooted and the customer has verified the LED display shows the loop and shelf of the media gateway.
The customer is satisfied the gateway controller has successfully registered to the Call Server. The customer logs into the system Manager and accesses the UCM Element list and the Gateway controller does not appear in the Element List with the other registered elements in the security domain.
What is the recommended course of action for the customer to ensure the Gateway Controller appears in the Element List?

Question20: A customer with a Communication Server (CS) 1000E Rls..5.5 with two IPMGs is upgrading their system to release 7 x. The Upgrade system will have two IP media Gateways.
Which two statements are true regarding DSP resources for the IP Media gateways in the Upgrade System? (Choose two)

Question21: Click the Exhibit button.

A technician is asked to review the existing trunk information for a customer According to the Element manager screen capture shown in the exhibit, which type of trunk is this?

Question22: Your customer has requested you add the Call Park Feature to their Communication Server 1000 Release
7x system. You have been asked to assign at least eight consecutive numbers that can be used to park calls.
Which CLI overlay and command will provide you with numbers that are unassigned and available?

Question23: A customer is adding a new Avaya Communication Server (CS) 1000E Rls. 7x server within their existing release 7x network. The CPMG based server will become member server within an existing CS 1000 Rls.
7.0x security domain.
Which statement describes the process you should use to simultaneously install Linux Base and deploy application to the CPMG Co-Resident server?

Question24: A customer with a Communication Server (CS) 1000E 5.5 HA system with IPMG systems and dual ISP
1100 signaling Servers is upgrading their system to release 7x. The ISP 100 Signaling Servers are being replaced with CPDC servers. The contents of the upgrade kit have been installed and the maintenance terminal connection has been established.
What are three other upgrades tasks to be completed? (Choose three)

Question25: A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system, and needs to access the Call Server Overlay Shell to use the Call Server Overlay commands.
Which two commands are used to access the Call Server Shell? (Choose two)

Question26: A customer that has an existing option 11C chassis system with an SCC card is planning t o upgrade to a Communication Server (Rls.) 1000E Rls. 7x system. A CPMG Co-Resident server card will be installed.
Which action must be completed manually?

Question27: A customer with a Communication Server (CS) Rls. 7x Co-resident system is experiencing an Element Manager issue where the page cannot be displayed to the users. The CPDC Co-Resident server has the following deployment applications:
Call Server
Signaling Server
Element Manager
Which course of action allows for the least service interruption when restarting the Element Manager Web interface?

Question28: A technician is completing the configuration of a new IP node for a system. All files have been transferred and synchronized, and 'restart applications' is clicked for the selected servers.
What will this cause the system to do?

Question29: A technician on a Communication Server 1000E SA Rls. 7x cannot get a second media Gateway to register with the Call Server. The call server and Media Gateway 1 sit in the same 19 inch rack while Media Gateway 2 is in another building and connected via the computer IP network Media Gateway 2 can ping the Call Server but cannot register. The network is suspected of having a firewall or port blocking issue.
Which diagnostic tool will help to isolate and identify a firewall or port blocking issue between the call server and Media Gateway 2?

Question30: Click the Exhibit Button.

A customer has asked if the Communication Server (CS) 1000 Rls. 7x system can provide Executive users with the ability to selectively drop people that have been added to a conference.
Based on the print-outs and assuming the CSD key has been programmed and the class of service assigned is CDCA, which capabilities are currently available to the user of extension 2006?

Question31: You are installing a new Communication Server 1000E HA Release 7x system for your customer.
Which two lists can be created using the lists feature provided with the EM phones Tool? (Choose two)

Question32: Click the exhibit button

During the installation the installation of a Communication Server 1000E Rls. 7x High Availability system for a customer, attempts to register an IP 1230 Desktop telephone with the system are unsuccessful.
Network connectivity issues have already been ruled out, however a system configuration issue is suspected.
What is causing the problem?

Question33: A customer has a several analog telephones running of a Flexible Analog Line Card (FALC) in an IPMG.
Users are able to receive calls on the telephone and have a conversation, however they cannot initiate a call as there is no dial tone.
What should be checked first?

Question34: A customer with a Communication Server (CS) 1000E at Rls. 5.5 with two IPMG is upgrading the system to CS 1000E SA release 7 x. The second media gateway includes a media Gateway Controller card with one high density DSP daughter board.
How many voice channels does this configuration provide?

Question35: A customer with a Communication Server (CS) 1000Rls. 6.0 SA is upgrading to Release 7.0. They have decided to replace the existing CPPM Call server CPPM Signaling Server with a CPPM Co-Resident Call Server, Signaling Server and Gateway Controller to free up a two card slots. A technician has decided to use the ELAN IP of the Call Server from the original system as the ELAN IP address of the Co-Resident server.
Which action must be taken to consolidate the servers?

Question36: A technician is installing the Linux Base Operating System software on the CPDC server for the Avaya Aura system and steps away while the software is loading. When the technician returns, he verifies that the Linux base installation is complete and successfully installed.
What status can the technician verify to ensure the installation is successful?

Question37: Click the exhibit button.

A technician is provisioning a new Communication Server (CS) 1000 Rls. 7x system for a customer, and is adding an SIP virtual route using Element Manager Routes and Trunnks.
What is the Trunk Type (TKTP)?

Question38: A technician has deployed a Communication Server 1000 Rls. 7x system at their site. You are using the Virtual Terminal to access Communication Command line interface (CLI) to add telephone.
Which Overlays (LDs) are linked to eliminate the need for existing one Overlay (LD) and entering another one?

Question39: A customer is planning to install and configure a Commercial Off the Shelf (COTS) server IBM X3550 as a Signaling Server for their Communication Server (CS) 1000 Rls.. 7x network.
Which two statements describe the software installation process? (Choose two)

Question40: A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system with a Media Gateway Controller and Media Cards and has completed the configuration of all elements and they are all active and known to the Call Server. The customer wants to add all the elements to the Security Domain.
Which Overlay 117 commands used to add the element to the Security Domain?

Question41: A technician has configured a new media gateway by connecting to the serial port for the MGC and entering network information for the card as well as the IP address for the Primary call server. When the MGC reboots, the faceplates displays UNRG. The Call Server console 'IPMG registration denied'.
What should be done to solve this problem?

Question42: Click the Exhibit button.

A customer has deployed a Communication Server (CS) 1000Rls. 7x system at their site, and has asked that a swap using the Element Manager Phones tool on the two telephone sets shows in the Print-out be performed.
What should the customer be told regarding the request?

Question43: A customer has completed the installation of the Communication Server (CS) 1000E Rls. 7 x system and wants to access Base Manager to configure and provision the Linux Base.
Which two actions are true regarding access Base manager? (Choose two)

Question44: A customer is implementing a Communication Server 1000E (CS 1000E) Rls. 7x High Availability (HA) system. The customer wants to know if there are any special package requirements beyond the HA Package needed for the system.
Which two software packages are mandatory when deploying a CS 1000E system? (Choose two)

Question45: A customer is installing a new common processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. They are connected to the backplane serial port 0 of the MGC to access the configuration menu. No IP information exists for the MGC.
How does the customer access the configuration menu for the MGC?

Question46: A customer has a Communication Server (CS) 1000Rls. 7x system and installing a stand-alone CPDC Signaling Server.
Which role should be chosen during the IP Telephony node Configuration?

Question47: Click the Exhibit button.

A technician is asked to review the existing route information for the customer.
According to the printout shown in the exhibit, type of route is this?

Question48: A customer with an existing Option 11C Rls. 5.5 chassis system plans to upgrade to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP Media Gateway (MG) 1000E chassis.
To complete the upgrade, which component in the Option 11C must be replaced?

Question49: A customer has deployed a Communications Server 1000Rls. 7x system at their site. Their sales department is expanding and has asked that five new telephones be added with the same capabilities as the existing telephones in the department.
Which programming command should be used to complete this task?

Question50: Upon accessing Subscriber Manager, you discover that the Subscriber Manager database does not accurately reflect all the telephones managed under the Subscriber Manager database.
Which Subscriber Manager operation is required to update the Subscriber Manager database with the communication Server 1000 telephones?

Question51: From which two ports is the Fully Qualified Domain Name (FQDN) composed, and in what order must they be configured?

Question52: A customer wants to build a new Ip node on their Communication Server (CS) 1000E system with three Signaling Servers. This node will support virtual trunks, IP media services, TPS and personnel directories.
A technician logs into Elements manager to complete the configuration, after creating and saving the node configuration, the transfer now option chosen, then the servers are selected, the start sync is selected followed by restart application.
What is expected outcome from the system?

Question53: A customer is preparing to install software on the CPMG server and would like to display the boot sequence on the system terminal for the BIOS, BOOT ROM, and operating System.
Which port on the CPMG server provides this information?

Question54: A customer has a Communication Server (CS) 1000E Rls. 7 x system with a System Manager as the primary Security Server that has been designated as a Deployment Server. The application file (.nai) has been uploaded to the deployment manager library. The customer has added an element to the security domain and wants to deploy software applications to the element.
With respect to deployment services, which statement is false?

Question55: Refer to the exhibit.

A Communication Server 1000E Rls. 7 x customer is adding a new Human Resources department with eight IP telephone users. The customer has asked for the telephones to be programmed with consecutive Directory numbers (DNs) from their DID range (2000-2099).
Which numbers sequence is available to meet the customer's requirements?

Question56: A customer is commissioning a Communication Server (CS) 1000E 7x system with package 403 (soft switch) and 402 (IPMG). The CPDC Call Server software has been installed successfully, and now the customer is provisioning the Media Gateway Tone and conference loops for the Media Gateway Controller.
Which switch overlay and prompt should the customer use to configure the Media gateway TDS loop?

Question57: A customer with an existing Communication (CS) 1000E 6.0 system is upgrading to a CS 1000E Rls. 7x HA system. As a part of this upgrade, the CPPM Signaling Servers are being decommissioned and replaced with CPDC signaling servers.
Which two methods can be used to restore the original IP Telephony node configuration to the CS 1000E Rls. 7x HA system? (Choose two)

Question58: A customer has completed the security configuration for the security servers in the Avaya Aura integrated system. The System is using Avaya Aura System Manager as the Primary Security Server. The Customer is accessing the Base manager of each Server from the Element list to perform base configuration changes. Aaa Base Managers are accessible except the primary server; When Clicking on the Primary Server, the customer is taken to the System Manager Dashboard page.
What is the recommended course of action for the customer?

Question59: A customer has installed a Media gateway controller (MGC) and would like to change the baud rate settings for the SDI parts. The baud rates for all serial Data Interface (SDI) ports on the MGC are configurable through call server?
Which overlay is used to configure the MGC SDI ports?

Question60: You customer just installed three Communication Servers 1000 Rls. 7x systems to support their new campus distributed corporate offices. The customer allowed for periodic synchronization of their corporate Lightweight Directory Access Protocol (LDAP) database with subscriber Manager.
Which Subscriber Manager Feature allows you to synchronize subscribers from an LDAP database and assign them to a telephone account of the same time?

Question61: A technician is planning on upgrade of an option 11C 5 x system to a Communication Server (CS) 1000E Rls. 7 x System with CPMG Co-resident Call server and Media Gateway Controller.
To perform the Linux Base software installation on the CPMG which component is required?

Question62: A customer is installing a new CPMG Co-Resident Platform in an Integrated Avaya Aura system with Avaya Communication Server 1000 7x software. The Linux Base image is preloaded shipped from the factory. The customer must enter the default password for the Avaya user account to access the system.
What default password does the customer use to login to the system?

Question63: Click the Exhibit button.

A technician is performing an upgrade of existing Communication Server 1000E Rls. 6.0 servers from the Deployment Servers. The system is pre-configured and the status is un-deployed. The server has been selected, but the Deployment Actions pull-down list does not include the choice to deploy.
Which two corrective actions must be taken to continue with deployment? (Choose two)